Tech

Top 5 Tips to Fix Netgear N300 Extender Red Light Issue

Are you troubled by the red light issue with your Netgear N300 WiFi extender? Well, you are not alone! Users all across the globe have been complaining regarding the same issue. So, worry not! Simply walk through the topmost troubleshooting tips mentioned in this article and learn how to fix the Netgear extender red light issue in a flash!

But, before you do that, you must become aware of the reasons that might have led you to the Netgear N300 extender red light issue. Read on.

Reasons Behind Netgear N300 Extender Red Light Issue

Here are some of the most common reasons why your Netgear N300 range extender is blinking red:

  • The hardware of your WiFi extender is damaged.

  • The Ethernet cable connecting your N300 extender and home router is worn out.

  • The firmware of your wireless device is running on an updated version.

  • The WiFi signals of your extender are getting interrupted because of electronic devices and transmitting appliances.

  • Technical glitches can also force your Netgear extender to flash red.

Now that you are well acquainted with the factors why your device is blinking red, take the help of the troubleshooting tips mentioned below to fix the issue.

Fixed: Netgear N300 Extender Red Light Issue

  • Update the Firmware

Start by updating the firmware of your Netgear N300 WiFi range extender. Walk through the instructions mentioned below and learn how to perform Netgear extender firmware update:

  • Launch an internet browser on your PC.

  • Access mywifiext.net.

  • If you are using an Apple device, then access mywifiext.local.

  • Enter the default admin details of your extender and hit Log In.

  • On the Netgear Genie dashboard, go to Settings.

  • Select Administration and click Firmware Update.

Once you are done updating the firmware of your device, check whether the Netgear N300 extender red light issue has been fixed or not.

  • Avoid WiFi Interference

The existence of electronic devices and transmitting appliances in the room can impact the performance of your extender and lead you to issues you’re currently facing. Thus, make sure that place your Netgear N300 extender away from WiFi interfering devices.

Such devices include cordless phones, washing machines, baby monitors, refrigerators, microwave ovens, Bluetooth speakers, treadmills, televisions, etc.

  • Check the Hardware

If by any chance you’re still struggling with the Netgear red light issue, check the hardware of your N300 extender. Is the power socket your device is connected to free of damages? If the answer is no, then you have two options:

  • Get your current wall outlet fixed.

  • Plug your Netgear WiFi range extender into a different wall socket.

If you are still facing the Netgear N300 extender red light issue, do not stop reading this post.

  • Verify the Ethernet Connection

As mentioned earlier, if the connection between your Netgear N300 range extender and WiFi router is weak, it’s bound to create issues. Therefore, make sure that your devices are well connected.

If the Ethernet cable connecting them is worn out or damaged from anywhere, it is recommended that you replace it with a new one immediately!

  • Reset Your Netgear Extender

Tried everything but still stuck with the Netgear N300 extender red light issue? No problem! Resetting your device will surely help you get rid of it. Here are guidelines you need to follow to restore your extender to the factory default mode:

  • Open an internet browser on your PC.

  • Access the Netgear N300 setup page.

  • Head over to the Settings menu.

  • Click the Reset option.

  • When asked for confirmation, hit Yes.

  • Now, wait for your Netgear range extender to get restored to the default mode.

Once your extender resets, feel free to connect as many WiFi-enabled devices to its Netgear_ext as you want to enjoy a seamless internet connection.

The Bottom Line

That’s it! This was all about the top 5 troubleshooting tips to fix the Netgear N300 extender red light issue. We hope that the steps mentioned in this article helped you fix the issue. If what we are hoping for comes true, don’t forget to leave a word of appreciation in the comment section.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker