Picture this- ‘You were having a good time watching your favorite series online. Suddenly, your Netgear Nighthawk router gets disconnected from the internet, and the issue occured again and again.’ Doesn’t it sound disappointing?
Well, don’t sweat over it. In this article, we will provide you with a list of hacks to fix the Nighthawk router not connecting to internet issue. So, here we go.
Fixed: Nighthawk Router Not Connecting to Internet
- Reboot Your Nighthawk Router
Your Nighthawk router might not be connecting to the internet due to technical glitches. But, these glitches can be easily resolved by rebooting your Netgear router. So, go through the below-mentioned instructions to reboot your WiFi device:
- Disconnect all the wired or wireless devices connected to the Nighthawk router.
- Press the Power button on your Nighthawk router to switch it off.
- Wait for some time.
- Press the Power button again to switch on your Nighthawk router.
Note: You can also execute the rebooting process by accessing the Nighthawk router setup wizard.
- Check the Cable Connection
Did you check the Ethernet cable before connecting it to the ports of your Netgear Nighthawk router and modem? Probably not. Looks like the Ethernet cable is damaged which has led you to the issue you are currently facing. So, without any delay, replace the old cable with a new one.
Besides, make sure that the connection between your devices is finger-tight. Placing the router and the modem close to each other can work wonders.
- Change the Router’s Location
Perhaps, you’re having a bad experience with your Nighthawk router due to an inappropriate location. Remember that the location of your Netgear router has a major role in determining its performance. That’s why it is recommended to place your WiFi device away from corners, concrete walls, and objects carrying a large amount of water.
Also, consider placing your Nighthawk router away from timber logs, microwave ovens, cordless phones, Bluetooth devices, refrigerators, television, etc. Doing so will prevent your router’s WiFi signals from being deviated.
- Update the Firmware
Oh! It seems an outdated firmware of your Netgear router has taken a toll over its smooth performance and ruined your internet experience. To get rid of the issue, simply update the firmware of your Netgear Nighthawk router.
You can update the router’s firmware by accessing the Netgear WiFi router setup wizard. Once you reach the BASIC Home screen, click the Firmware Update option under the Settings menu. Once done, check if you are still endeavoring with the issue.
- Contact Your ISP
Your Nighthawk router might also face difficulties connecting to the internet due to an issue from the end of your Internet Service Provider. So, wait no more, and contact your Internet Service Provider to confirm the same. If our assumption comes true, then give him some time to fix the issue.
What happened? There’s nothing wrong at the end of your Internet Service Provider. Don’t worry! We have more troubleshooting hacks. So, continue reading.
- Reset Nighthawk Router
If none of the aforementioned troubleshooting hacks are of no avail, then we recommend you reset Nighthawk router By doing so, you will restore your Netgear router to the factory default settings and be able to fix the issue.
Walk through the instructions mentioned below to reset your Netgear Nighthawk router:
- Ensure that your Nighthawk router is getting an enough power supply from the wall socket.
- Once assured, start looking for the Reset button on your router.
- As soon as the search for the button finishes, grab a sharp object.
- Press the Reset button using that object.
- Hold for some time.
- Your Netgear Nighthawk router will reset.
Now, reconfigure your wireless device by accessing the Netgear router app
That’s all you can do to resolve the Nighthawk router not connecting to the internet issue. Closing with the hope that you’ll be able to get rid of the issue with the help of the above-discussed troubleshooting hacks. Thanks for reading the article.